---
title: "How to Add Audio or a Voice-Over to a Video Online"
description: "Import a recorded voice-over, place it against the picture on the timeline, set a level that survives a laptop speaker, and listen to the exported MP4."
canonical: "https://freeaigeneration.com/en/guides/how-to-add-audio-or-voice-over-to-a-video-online/"
robots: "noindex"
lang: "en"
---

# How to Add Audio or a Voice-Over to a Video Online

The picture is usually finished before the voice exists. A voice-over take, an interview or a screen recording arrives as a separate file with its own length and its own idea of where the words start.

The browser Video Editor handles it in a short sequence: import the audio, place it against the picture on the timeline, set a level a listener can follow, export, and play the file you get back. The middle step takes the time, and it is done by hand.

## Importing the take

Spoken audio is imported the same way as the picture: the media panel takes stills, audio and video, and the audio lands on the timeline beside the shots. PCM WAV is the format import was verified with, and being uncompressed it is the easiest to reason about.

Sample rate times bit depth times channels gives the data rate: 48 kHz at 16-bit mono is 48,000 × 16 × 1 ÷ 8 = 96,000 bytes per second, 5.76 MB a minute. Stereo doubles it, so a twenty-minute interview is around 230 MB.

Whether a compressed take opens is up to the browser rather than the editor. Codecs the browser supports are decoded by its own WebCodecs decoder, and everything else goes through the decoders built into the engine, so an MP3 or a phone recording may not play at all. Import it, play it, then decide how much of the edit depends on it. If it will not open, convert that take to PCM WAV.

## Placing it against the picture

The audio sits on its own track, drawn as a waveform. Words appear as dense blocks and the gaps between them as thin lines, which tells you where a sentence begins.

Sync is manual. Place the clip, play the sequence, move the audio until the sound lands on the right frame, then trim the head and tail. Move the audio clip on its own wherever the editor lets you; dragging it with the video means redoing the alignment for everything that follows.

One behaviour that looks like a sync fault has a simpler cause. Audio starts suspended until the first click or key press on the page, and until then playback runs on the wall clock instead of the browser's audio clock. Click into the page before judging timing.

## Setting a level the voice survives

The voice has to sit above the rest of the mix. Bring the spoken track up until it is clearly the loudest sustained element, then listen somewhere unkind: a laptop speaker, a phone at half volume. A voice judged only on headphones arrives quiet on a phone.

If your build exposes a fade at the head and tail of a clip, a short one stops a voice from starting and ending mid-breath. It is a courtesy rather than a repair: a line that was too quiet does not become audible by fading in.

## When there is no take yet

Two optional extras cover the case where nothing has been recorded. Speech-to-text produces a transcript, and narration voices read text aloud. Both download a model from Hugging Face, after a confirmation dialog that names the source, the size and the licence, which for the narration model is Apache-2.0.

Treat both as conveniences with a cost. They need a download, they need the tab open, and a generated line will not sound like a take you recorded.

## Listening to the export

Export produces an MP4 whose video is H.264, with the audio carried in the same container. The timeline is a preview; the file is the deliverable, and the way to judge it is to play it in an ordinary player.

Two places fail first: the opening seconds, where a trimmed word begins mid-syllable, and the end, where the voice stops before the picture does. Listening once without watching is worth a minute, because a level jump is easier to hear than to see.

Export is stepped at roughly 30 ms per interface frame, so a long sequence runs for minutes with progress in the header. Imported media stays readable only while the tab is open, so export before you close the page.

## Before a long session

Codec support belongs to the browser, so the same file can open in one and not another. The export in practice is H.264, because H.265 and AV1 export need a hardware encoder browsers do not expose to a page. The browser version runs single-threaded, so render previews and proxies report an error instead of running slowly, and a large project is slower here than in a desktop application.

The voice lands on the timeline before any level matters, and [how multi-track video timelines work](/en/guides/edit-video-online-multi-track-timeline/) covers the lanes, the playhead and how sequence length adds up across tracks. [MP4 vs MOV vs WebM](/en/guides/mp4-vs-mov-vs-webm-which-video-format-should-you-use/) separates the container from the codec, and [exporting video for YouTube, Instagram and TikTok](/en/guides/how-to-export-video-for-youtube-instagram-and-tiktok/) covers what happens to the file afterwards.

The free [Video Editor](/en/tools/video-editor/) is where the take goes: import it, place it against the picture, and check the exported file.